Contact Your Dealer
1. In the process of typing, the bottom line is too close to the edge of the object.
2. The thread used for the bottom is too thin or the angle is not good enough to fix the cloth.
3. The type should be played out from the center as far as possible, so that it is more stable in the production process.
4. Repeated use of double-sided tape in the production process, the viscosity is reduced, unable to fix the cloth.
5. Due to the deterioration of the machine's aging precision, a wrong position is caused, such as: the wrong position happens just on some product for the same production.
6. The fluff of cloth surface causes the wrong position, which is obvious when stick cloth.
7. Because the interlining is too thin under the cloth, it can not be lined up well.
8. The strength of pulling the cloth on the embroidery machine or it will be out of shape easily.
9. The typing should consider the overall rationality of the needle. You can not embroider several needles on one place and then embroider a big flower on another place far away from the former place, and then back to pack the single needle with the packed needle, which is normal to cause wrong position. Thought it can not see in the software, it will change on the embroidery machine.
10. It will greatly reduce the possibilities of wrong position by increasing the times of changing color, though it will reduce productivity. It depends on how you combine it.
